Environmental Chamber Accessory Particle Equipment and Single Channel FTIR Analyser
1.Bidding Conditions
Overview:The project is entrusted by Faw Jiefang Automotive Co., Ltd. Wuxi Diesel Engine Works, the name, quantity, main technical data, and delivery time as below.
Source of Funds:Self-funded
Description of the Prepared Bidding Conditions:Completed
2.Bidding Content
Bidding No:0736-234020230084
Project Name:Environmental Chamber Accessory Particle Equipment and Single Channel FTIR Analyser
Place of Implementation:Jiangsu
List of Products:
No. | Product Name | Quantity | Main Technical Data | Remarks |
1 | Granular analysis equipment | 1 | Filter paper trays support 47mm and 70mm diameter filter paper in a four channel design, with three 47mm and one 70mm filter paper trays. And insulation control with a control temperature range of 47±5°C | Time of Delivery: On FCA basis within 7 months after contract signing (for overseas bidders)/ Delivery to user site on DDP basis within 7 months after contract signing (for domestic bidders) |
2 | Granular counting equipment | 1 | The measurement size shall be within 10nm-2.5um; the measurement frequency shall not be lower than 5Hz; and the corresponding time for T90 shall be less than 5s. | Time of Delivery: On FCA basis within 7 months after contract signing (for overseas bidders)/ Delivery to user site on DDP basis within 7 months after contract signing (for domestic bidders) |
3 | Single channel multicomponent FTIR equipment | 1 | The temperature of the measuring chamber and the heating sampling shall be controlled at 191°C±5°C with the temperature fluctuation no more than 6°C and the sampling line no less than 10m so as to ensure the use requirements in the laboratory. The high back pressure front filter shall be equipped to ensure the sampling within the exhaust pressure range of -200~+3000mbar. Since the equipment is arranged outside the environmental chamber, the sampling pipe shall pass through the chamber wall. The Supplier shall provide the through-chamber flange matching the sampling pipe quantity to connect the internal and external sampling pipes. Ensure that there is no deformation and leakage around the sampling pipe due to negative pressure. And provide specific drawings and dimensions of the through-wall flange in the Tender Documents | Time of Delivery: On FCA basis within 7 months after contract signing (for overseas bidders)/ Delivery to user site on DDP basis within 7 months after contract signing (for domestic bidders) |
3.Qualification Requirements for Bidder
Qualification Requirement:The bidder shall have the corresponding supply capacity for this tender project, the right to sign contracts independently and the ability to perform them. Financial Requirements: The Bidder shall provide a scanned copy of the bank reference letter issued by the accounting bank within three months prior to the bid opening date.
Contract Reference Requirement:The bidder should have undertaken at least one similar performance, and should submit a copy of the contract of similar performance dated January 1, 2020 to the date of bid opening (if the contract cannot explain the specific content of the project, a technical agreement should be attached), with the following specific requirements: 1) The contract should have the signatures or seals of all parties, except for special forms of contracts such as electronic contracts and orders; 2) A copy of the contract shall include at least the names of the parties to the contract, the subject matter of the contract, the date of the contract and the signature and seal page (the contract amount is not required for performance); 3) The contract date shall be subject to the later one between the effective time of the contract and the signing time of the contract; 4) Such performance refers to engine emission test equipment.
Joint Venture Bids/Consortium:Not Acceptable
Bid without the bidding documents:Not Acceptable
4.Acquisition of Bidding Documents
Beginning of Selling Bidding Documents(Beijing Time):2023-06-07 22:00
Ending of Selling Bidding Documents(Beijing Time):2023-06-14 23:59
Sell bidding document online:No
To Obtain bidding document:On-site Purchase
Place:Log in https://etp.faw.cn/ and click
upper right corner “International e-Bid” to obtain bidding document
Price of Bidding Documents:¥800.00or $120.00
Additional Instructions:1.This is an
international e-Bid project. The bidder who has no prior international e-Bid
experience on our above website must register first free of charge. The
registration requires the bidder submit relevant documents and will be reviewed
by our staff. After passing the review the bidder’s registration is complete.
2.Certificate Authority(CA) application: CA is used for the identification of the bidder online, encryption and decryption of the e-bid document, and signature on the e-bid document. The bidder shall apply the CA on your website https://etp.faw.cn. The bidder shall bear the consequences for not applying the CA in time (normally it takes 3-5 days to send the CA by courier within China
3.Download the Bidding document: After registration and payment of the bidding document fee as the clause 8 down below, the bidder can log in FAW international e-bid Platform (https://intlbid.etp.faw.cn/en/index.html) to download the bidding document online. Submittals will ONLY be accepted via e-Bid.
4.The fee for bidding document shall not be refunded after purchase of
the bidding document.5. Microsoft Office, latest version IE explorer is required. And please
download the “Driver” from FAW International e-Bid Platform. The bidder shall use
the Digital Certificate to log in the platform to participate the bid opening
and to decrypt the e-Bid documents. If decryption is failed due to bidder’s
reason, it shall be deemed as bidder’s withdraw from the Bid.
5.Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):2023-06-28 10:00
Place of Bid:Online e-bid opening room of https://etp.faw.cn/
Place of Bid Opening:Online e-bid opening room of https://etp.faw.cn/
6.Website registration:
The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on www.chinabidding.com.
7.Contact Details
Purchasers:Faw Jiefang Automotive Co., Ltd. Wuxi Diesel Engine Works
Add.:No.98, Yongle East Road, Wuxi, Jiangsu, China.
Contact:Miao Jun
Tel:15961871785
Bidding Agency:Changchun FAW International Tendering Co.,Ltd
Add.:No. 3462, Dongfeng St., Changchun, China, Jilin Province, China
Contact:Shi Shaohua;Yao Yao
Tel:15261663792;15500535710
Email:shishaohua3@faw.com.cn;yaoyao5@faw.com.cn
8.Remittance Approach:
Bidding Agency:Changchun FAW Internati onal Tendering Co.,Ltd
Bank name:Bank of China, Changchun city FAW Sub-Branch
Account:(USD):1588 0104 2317
Additional:Bank SWIFT Code:BKCHCNBJ840
To purchase bidding document in the currency of CNY, please log in the platform online and pay the document fee.
To purchase bidding document in USD, please pay the fee to above account and then upload remittance certificate online ,Any banking charge shall be born by the purchaser.
9.Additional Instruction:
Site exploration:Not Available
Trading Agency as bidder:Not Available